Archive for the ‘Ohio’ Category

Announced 50MW Ohio solar farm threatens SREC market

Posted November 16th, 2010 by SRECTrade.

In October AEP Ohio announced a 50 MW solar project to be built in southeastern Ohio.  The facility will be developed by Turning Point Solar and the electricity and SRECs will be purchased by AEP.  The announced project will be phased in over 3 years, starting with 20 MW by 2013, 15 MW by 2014 and the remaining 15 MW by 2015.  This is not the first time that AEP has elected to procure SRECs from utility-scale facilities. AEP met its 2010 and 2011 SREC requirement primarily from a 10 MW facility built in Upper Sandusky, OH.

Although the announced project may still see some hurdles before all contracts are finalized and construction commences, the prospect of 50 MW worth of SRECs flooding the market in the next few years will likely have an impact on the growth of the Ohio solar industry. Ohio currently allows buyers to source 50% of the SRECs from out-of-state. Since there is more supply in the out-of-state market, prices will likely be lower than the in-state market. In 2011, the existing 10 MW project will represent 23% of the total market in Ohio, meaning that roughly half of the SRECs required from in-state will come from the Upper Sandusky project next year. In 2012, the Upper Sandusky project will represent 11% of the overall market, roughly one-fourth of the in-state market. Then, in 2013, when the first 20 MW of the Turning Point project comes online, the 30 MW available to AEP will represent 23% of the total market, again, roughly half of the in-state market.  These percentages increase slightly to 25% and 26% in 2014 and 2015 when the additional 15 MW tranches are turned online.

Although the argument can be made for the jobs created by the project and the progress towards the ultimate goal of solar energy, projects of these size can impact SREC markets in a way that could halt the development of a sustainable in-state solar industry. Other states have dealt with this issue in various ways that could hopefully serve as an example for Ohio to follow.

In New Jersey, up until 2010, facilities over 2 MW were ineligible for the SREC program. When the requirements increased to 160 MW, while the state only had 80 MW installed, the legislature passed a bill opening the doors to larger projects. This made sense both because New Jersey was so far behind and because the exponential growth in the increasing requirements made it impossible to keep pace without projects above 2 MW. The legislature also limited the ability of investor-owned utilities from building large projects, requiring approval from the BPU based on the projected impact in SREC pricing.

In Delaware, a 10 MW Delmarva Power project threatened to collapse the SREC market when it was still in its infancy. The Delaware Sustainable Energy Utility (SEU) stepped in to purchase the SRECs and take them out of the market. The SEU is a quasi-governmental organization that used its funding to support the SREC market. In response to this, and the fact that most Delaware solar owners were selling in Pennsylvania, the Delaware legislature increased the fines and requirements in Delaware in 2010.

In Massachusetts, the state recently voted to increase the ceiling on solar project sizes eligible for the solar carve-out from 2 MW to 6 MW. This increase was needed to help the state kick-start the SREC market which was well-behind the target midway through 2010.  Though the market will do very well for reasons stated here, the 6 MW cap re-iterates Massachusetts commitment to developing a solar industry, not just a few giant solar farms.

If more states could follow the lead put forth by New Jersey, Massachusetts and Delaware, the SREC program would be far more effective in promoting solar in a way that best benefits society. While the utility lobby would prefer to maintain the status quo of centralized power generation since generation and distribution are their primary purposes, the solar industry is best suited to promote distributed, decentralized power generation. If every SREC market were overcome by the generation of a few behemoth solar farms, each state would be left with several solar projects and a few successful developers, instead of an industry. Meanwhile, the states that temper the growth of utility-scale solar and focus the SREC markets on residential and commercial solar will see electricians, general contractors, roofing companies and heating & air conditioning companies build sustainable businesses around solar. This will lead to jobs and job growth far more effectively than the influx in short-term construction jobs created by the occasional 50 MW solar project.

Subscribe

Solar Capacity in the SREC States in 2010

Posted July 28th, 2010 by SRECTrade.

SRECTrade’s State of the SREC Markets in 2010
The New Jersey, Pennsylvania and Delaware Energy Years came to a close on May 31, 2010.  The following is a report of the solar capacity in megawatts (MW) certified and registered to create SRECs in all states at that time.

Solar generators by state located: This table is based solely on the location of the facility and does not include multiple state listings. All facilities must have been registered by May 31st, 2010.

As you can see New Jersey has by far the largest amount of solar installed and eligible for SRECs with 146 MW. Pennsylvania is a distant second at 17 MW.  Meanwhile, Ohio and Illinois are third and fourth respectively, however of the 16 MW in Ohio, 12 come from one facility and of the 10.1 MW in Illinois, 10 come from one facility. Delaware and Maryland both have sizable markets at around 6 MW each. Volumes in other state are much smaller since there is no local SREC market.

Solar generators by size: Projects certified for SREC markets range in size from as small as 0.5 kW to as large as 12 MW, however, only 20 out of the 7,700 projects are over 1 MW.  Of those 20 projects all are well below 5 MW, with the exception of a 10 MW facility in Illinois and 12 MW facility in Ohio. The lack of multi-MW facilities in the SREC markets is a function of both the complexity involved and constraints on demand. The only state SREC market today with any legitimate appetite for multi-MW facilities is New Jersey.

Solar generators by state eligibility: Because some states accept out-of-state SRECs, the in-state supply listed above differs from the total supply available to buyers in that state.  For instance, Ohio’s market also includes facilities located in PA, WV, KY, IN, and MI.  The table below lists the total solar capacity in megawatts eligible for each SREC market, along with the percent of the market that is sourced in-state.  Note: many facilities will be counted multiple times in this table since they are eligible in several states. For example, the 10 MW facility in Illinois is eligible in both DC and PA.

In Ohio 89.6% of the market is in-state SRECs. Some of our customers have asked why in-state Ohio SRECs do not sell at a premium because of the 50% in-state requirement. The reason is that, as you can see, buyers are not having difficulty meeting the 50% requirement with the large supply of in-state SRECs. In the future as the requirements increase, in-state SRECs could be harder to come by and may indeed sell for more than out-of-state SRECs.

Interpreting the data: One important thing to notice is that the 2010 Capacity Requirement column details the capacity required to be sustained throughout the entire energy year. The Volume column shows the capacity registered through May 2010. For example, New Jersey needed approximately 160 MW of capacity running on average from June 2009 through May 2010 in order to meet the 2010 SREC requirement. The state is actually farther away from the 160 MW capacity mark than the 145.69 MW volume would suggest.  Capacity in New Jersey grew approximately 65 MW over the course of the year and so there were probably only enough SRECs created to meet approximately 110-115 MW of the 160 MW requirement. That requirement increases in the 2011 Energy Year to approximately 260 MW. For more information on the growth of the New Jersey market and any other state market, please visit our page devoted to State SREC Markets.

Assumptions used in calculations: Solar capacity required is based on 2007 Department of Energy electricity sales figures, assuming a 1.5% growth rate. The resulting solar megawatt-hours required (i.e. SRECs) are converted to megawatt capacity requirement at a rate of 1200 MWhs per MW.

Importing and Exporting SRECs across Registries

Posted July 21st, 2010 by SRECTrade.

With the launch of the North Carolina Renewable Energy Tracking System (NC-RETS), North Carolina is paving the way for what could be the future for SREC markets. For the first time, an SREC created in one region’s registry will be transferable to a buyer in another region’s registry. This cooperation amongst registries could be the first step towards a permeable nationwide SREC market.

North Carolina is currently working with other renewable energy certificate tracking systems to approve a process for importing and exporting SRECs. The approval of exporting SRECs from other tracking systems and importing them into NC-RETS would allow solar system owners located in states without viable SREC markets to sell into the North Carolina SREC market. This is all possible because almost all of the registries were built with similar technology developed by APX.  More information on all of the registries can be found here: APX Primer on REC Registries.

NC-RETS is working with the parties responsible for maintaining the other regional registries to develop the importing and exporting process.  Here is a list of those registries and an update on the status of importing and exporting:

NARR: The North American Renewables Registry (NARR) was developed by APX to serve the needs of states and regions that have not implemented a REC tracking system.  This covers most of the Southeastern U.S., Alaska and Hawaii.  NARR has already established importing/exporting procedures with NC-RETS.

MRETS: The Midwest Renewable Energy Tracking System (M-RETS), the registry that tracks the generation of SRECs in 8 Midwest U.S. states and the Canadian province of Manitoba, has approved the exportation of SRECs and is implementing the necessary software upgrades.

GATS: Generation Attribute Tracking System covers the Mid-Atlantic states and currently tracks the majority of SREC volume due to member states like New Jersey, Pennsylvania and Maryland.  GATS is expected to allow importing/exporting soon.

WREGIS: The Western Renewable Energy Generation Information System (WREGIS), the registry that tracks the generation of SRECs in 14 Western U.S. states, Baja California, and the Canadian provinces of Alberta and British Columbia, is capable of managing exports and is in the process of making a policy decision to allow the system to export SRECs.

ERCOT: Texas, the sixth state to adopt an RPS in 1999, was the first to implement a procedure for meeting the RPS.  The Electric Reliability Council of Texas (ERCOT) was the first registry of its kind.  Unfortunately, it does not currently have the capability to export SRECs and it may require legislative approval to make the necessary changes to the system’s software. However, NC-RETS and APX are working with ERCOT to come up with a solution.

Additional Info for DC SREC registrations

Posted May 10th, 2010 by SRECTrade.

DC Eligibility
For customers looking to register systems in the DC SREC market, as we have previously stated, DC will accept applications from customers sited in the PJM regions and states adjacent to the PJM region where electricity is eligible to be transmitted into the PJM region. SRECTRADE will manage the application process for our EasyREC customers to ensure the system is approved.

DC Facility Rejections
We previously reported that a facility was rejected out of New York state and have learned that the application provided that the electricity was not capable of being transmitted into the PJM region. The DC PSC was subsequently unable to get clarification in order to approve the facility.

A second facility in New York has also been rejected because there was “no basis to conclude that the facility generates electricity consumed within the PJM Interconnection region.”  We are currently seeking clarity on how these determinations are made and will post them when we have more information.  In the meantime, here are some details:

DC rule 945-E-1764 (http://www.dcpsc.org/pdf_files/commorders/dcmr15/Chapter29.pdf) defines a renewable energy credit as “a credit representing one megawatt hour of electricity consumed within the PJM interconnection region that is derived from a tier 1 renewable source, a tier 2 renewable source, or a solar source that is located:

“In the PJM Interconnection region or in a state that is adjacent to the PJM Interconnection region.”

The same document describes New York as an “Adjacent PJM State” and the New York Independent System Operator (NYISO) as an “Adjacent Control Area”.  The crux of the issue seems to be the wording “consumed within the PJM interconnection region”.  Electricity flows bidirectionally between PJM and NYISO every day, the amount varying based on supply and demand in the two ISOs.  An electron generated in NYISO clearly can’t be tracked (Heisenberg and all), so there is no way to know if a given electron generated by the grid-tied solar installation makes its way into PJM and is consumed. In fact there is no way to know if a given electron generated by any installation in any “Adjacent PJM State” makes its way to PJM and is consumed there, although it is possible that any electron generated in an adjacent PJM state will. Going even further, an electron generated by a system located in DC might actually be consumed outside PJM! As we see it, this leaves two choices on how to interpret the DC RPS rules. Either every grid tied generator in an “Adjacent PJM State” could be delivering their electrons to be consumed in PJM and therefore all are eligible to create DC renewable energy credits, or none can prove that their specific electrons where consumed in PJM and so none are eligible.

How far back will DC accept SREC generation?
We also get questions about systems that were installed prior to the application date in DC. Customers and installers will ask how far back DC will count solar generation for SRECs. DC will only count SRECs created in the current energy year (same as calendar year) as long as generation is inputted before the last business day in January. This means that, as of this blog post, any generation for a facility in 2009 will not count. Only generation from January 2010 onwards will be eligible for the creation of SRECs.

Subscribe to the SREC Blog by Email


PJM Region

Posted March 28th, 2010 by SRECTrade.

The PJM Interconnection is a regional transmission organization.  It serves to connect the electricity produced by the various utilities across a region.  In several states, the Renewable Portfolio Standard legislation lets utilities count renewable electricity produced within the PJM region towards meeting the state’s renewable goals.

In Pennsylvania, for example, a resident within the PJM region can apply for certification in the Pennsylvania SREC program.  If your system is convered in this map, you can sell SRECs to PA!

Washington, DC is similar to Pennsylvania in that both allow SRECs from anywhere within the PJM region, however DC will also qualify facilities that are eligible to deliver their electricity into the region. This may include facilities in states that are adjacent to the PJM region such as New York or Wisconsin.

Ohio is another state that allows SRECs from out of state. In that specific case, the utilities are limited to buying 50% from out of state and only from states within the region that are contiguous: Pennsylvania, West Virginia, Kentucky, Michigan and Indiana.

Washington, DC is similar to Pennsylvania in that both allow SRECs from anywhere within the PJM region, however DC will also qualify facilities that are eligible to deliver their electricity into the region.

For these reasons, it is important to know what constitutes the PJM region to determine whether or not you qualify.  Here is a map of the region, along with the retail electricity companies who are served by PJM.

pjm-region


New to Solar?

Posted February 15th, 2010 by SRECTrade.

We realize that many visitors of our site are learning about solar for the first time, so we thought we would put up this post by way of an introduction and some guidance on how to navigate our site. A growing number of states are implementing SREC programs. If you are new to solar, here is what you need to know:

1. Understand SRECs: For a deeper understanding of what SRECs are and how the programs work, visit our SREC Program page.

2. Find out where you are eligible to sell your SRECs: Your state may or may not have a program, however your ability to sell your SRECs into other states could have a significant impact on the value of your SRECs. You may be eligible to get your system certified in many state programs, regardless of if your state has one or not. Everyone should check our Cross-Listing post to see the states in which they may be eligible for certification.

3. Get your system installed: SRECTrade works with several installation companies. In addition, you should be able to sign up for the EasyREC service through your installer. If they do not offer the service, then feel free to contact us directly.

4. Enroll with SRECTrade: SRECTrade provides two options. If you sign up for the EasyREC service, we handle everything else including submitting your state certification applications, creating your SREC tracking account and automating the sale of your SRECs in our auction.

If you do not sign up for EasyREC, here are the additional steps:

4a. Get your system certified by your state: Once the system is installed, it is now ready to be certified by your state and any other states in which you are eligible. You can find out more on where you are eligible and how to apply on the Cross-Listing page. Every state handles this process differently, but we recommend beginning the application as soon as possible, before your installation is complete.

4b. Set up your SREC tracking account: Every state or region will use a different system for creating and tracking the SRECs. The Mid-Atlantic states use GATS, North Carolina uses NC-RETS, Massachusetts uses NE-GIS. If you opt to manage your own SRECs, you will need to have a tracking account with one of these registries. Once you have SRECs in that account, you can then post them in our auction.

4c. Create an account online with SRECTrade: This is the simplest step of all. Complete the online form to create your account and when your SRECs are available in your tracking account, log into your SRECTrade account, select the “Orders” link and place an offer to sell your SRECs.

5. Understand the timing: After you initially sign up, it will take a few months before you begin receiving payments. For example, if your system goes online on January 1st, your January generation will be recorded on February 1st. Your first SREC(s) will be actually credited to your account on March 1st. They would then be sold in the March auction, so your first payment would come in late March. After that, payments will come as SRECs are generated. Also note: some systems operate on a quarterly basis, rather than monthly.

As these processes are refined, we will continue to update this post. Please feel free to contact us any time at 877-466-4606 if you have any questions.

DC State Eligibility Criteria

Posted January 25th, 2010 by SRECTrade.

The District of Columbia is one of the states that will allow its electricity suppliers to procure SRECs from out-of-state solar generating facilities. There are no defined boundaries for what states may qualify for certification in the DC SREC market. According to information received by SRECTrade, the DC PSC will approve SRECs for states in the PJM region and states adjacent per the following guidelines:

The DC Public Service Commission is responsible for approving applications to the DC SREC market.  Their rule of thumb is that if your state has an RPS similar to DC you are guaranteed certification in DC. Currently those states include Maryland, Pennsylvania, Delaware, New Jersey and Ohio.

Solar facilities built in all other PJM area states AND adjacent states are reviewed closely and the DC PSC will determine if they can be granted certification. Currently, they have not declined a registration from any of those states because of location. Based on the map of the PJM region, these states include: Indiana, Illinois, Kentucky, Michigan, Tennessee, Virginia, West Virginia and Wisconsin.

Here is a link to get you started:

DC Certification Instructions

Cross Listing Your SRECs

Posted January 3rd, 2010 by SRECTrade.

2011 Update: State certification information can be found here

One of the benefits of the SRECTrade multi-state auction platform is the ability to cross-list in multiple states in which you have registered your SRECs. If an SREC is cross-listed, it will be included in any state in which it has been registered to be sold.  SRECs will be sold in the state auction that offers the most value. In order to qualify to sell your SRECs in a state that accepts out-of-state SRECs, you need to get your system certified in that state. The following section has information on what states accept out-of-state SRECs and how to get your systems registered and obtain a state certification number. For EasyREC customers, SRECTrade can help you register in the states available to you.

SREC Markets by State

SREC State Registration Information:

Delaware

To get a Delaware state certification number, your installation must be located in DE. You must apply to become an Eligible Energy Resource. The link for the application is here.  For more information, go to the Delaware Public Service Commission.

Contact:
Delaware Public Service Commission
861 Silver Lake Boulevard
Cannon Building, Suite 100
Dover, DE 19904
Main: (302) 736-7500
Toll-Free: (800) 282-8574
Fax: (302) 739-4849

District of Columbia

Eligible to states within and adjacent to the PJM Region. For information on the DC registration process, see DC State Certification Instructions.

Contact:
Dorothy Wideman
Commission Secretary
Public Service Commission of the District of Columbia
1333 H Street, N.W
2nd Floor West Tower
Washington, D.C. 20005

Maryland

To register in Maryland, your solar installation must be in MD and you must complete and file an application for certification as a Solar Renewable Energy Facility (REF) with the Public Service Commission. The link to the application is here.  For more complete details on the process, see Maryland SREC Registration Details.

New Jersey

New Jersey is a closed market, therefore only SRECs produced in New Jersey are eligible. New Jersey residents can apply for state certification at the New Jersey Office of Clean Energy’s website.

Contact:
New Jersey’s Clean Energy Program
c/o Conservation Services Group
75 Lincoln Highway, Suite 100
Iselin, New Jersey 08830
Phone: 866-NJSMART (866-657-6278)

North Carolina

North Carolina is still in the early stages of implementing an SREC program. The state is still accepting applications for a REC tracking system through December 15, 2009.  More information can be found on the North Carolina Utilities Commission website. A sample application can be found here.

Contact:
Chief Clerk
North Carolina Utilities Commission
4325 Mail Services Center
Raleigh, NC 27699-4325

Ohio

Utilities in Ohio are allowed to procure 50% of the SRECs from out of state facilities. However, these states must be contiguous with Ohio (PA, MI, IN, KY, WV). Instructions and forms required for Ohio certification can be found here: Application for Certification as an Ohio Renewable Energy Resource Generating Facility

Contact:
Public Utilities Commission of Ohio
Email: AEPS@puc.state.oh.us
Toll-Free: (800) 686-PUCO (7826)
Phone: (614) 466-3292 (in Columbus area)
Fax: (614) 752-8351
180 East Broad Street
Columbus, Ohio 43215
Directions to the PUCO

Pennsylvania

Utilities in Pennsylvania are allowed to buy out of state SRECs from solar generators in the PJM region to meet the Renewable Portfolio Standard. If you are interested in selling in PA, you need to get your solar system registered.  For a detailed explanation of the process with screenshots see our most recent post on Pennsylvania State Certification Registration Process.

Contact Info:
Dina M. Deana
Pennsylvania AEPS Program Manager
Clean Power Markets, Inc.
Phone: 1-877-AEPS-773 (1-877-237-7773)
Fax: (610) 444-9213
Email: paaeps@cleanpowermarkets.com



Qualifying for the Ohio SREC market

Posted December 16th, 2009 by SRECTrade.

This is the first year that the Ohio RPS has come into effect and we expect Ohio to be one of the best market for SRECs over the next few years.  With an established SACP starting at $450 this year, a large electricity market, and a growing solar requirement, we expect Ohio to surpass Pennsylvania and many of the other SREC states in volume.  For that reason, we recommend registering in Ohio if you are from Ohio and any of its neighboring states: Pennsylvania, West Virginia, Kentucky, Indiana and Michigan.  For Pennsylvania residents, the early months of the Pennsylvania auctions brought a price of $290-$300, but your PA SRECs could be worth up to 30% more in the Ohio market.  To find out more about the Ohio SREC program follow this link.

Registering in Ohio

Utilities in Ohio are allowed to procure 50% of the SRECs from out of state facilities. However, these states must be contiguous with Ohio (PA, MI, IN, KY, WV). Instructions and forms required for Ohio certification can be found here: Application for Certification as an Ohio Renewable Energy Resource Generating Facility

Contact:
Public Utilities Commission of Ohio
Email: AEPS@puc.state.oh.us
Toll-Free: (800) 686-PUCO (7826)
Phone: (614) 466-3292 (in Columbus area)
Fax: (614) 752-8351
180 East Broad Street
Columbus, Ohio 43215
Directions to the PUCO

SRECTrade launches in Ohio

Posted June 18th, 2009 by SRECTrade.

We are really excited to announce that we will be launching our auction in Ohio next month! We are adding seven new states in our July 10th auction and giving SREC sellers the ability to cross-list their SRECs. Unlike previous years, the Ohio SREC market is going to be significant and increase rapidly every year. Our estimates show that there will be a demand for 6,200 SRECs in Ohio this year, half of which must come from Ohio generators. These numbers represent the 0.004% solar requirement for utilities in Ohio and this number will grow to 0.5% by 2024.

Utilities that fail to comply will have to pay a Solar Alternative Compliance Payment (SACP) for each SREC (i.e. 1 Mega Watt Hour of electricity) they are short. For 2009, this has been set at $450. For 2010 and 2011 it will be $400, $350 for 2012 and 2013, and will continue to drop $50 every two years until it reaches $50 in 2024.

The SACP somewhat represents the ceiling price for SRECs. This is the first year that the SREC requirement is significant in Ohio where the demand is expected to be higher than supply. This means utilities will be willing to pay prices closer to the SACP. Therefore, our suggestion would be to not enter into long-term contracts, at least for now, as the future of the SREC market is still not fully certain.

PA, MD, DC, and OH accept out of state SRECs for now. For those of you who wish to be able to sell your certificates in these states, your system needs to be registered in that state and have a separate State Certification Number. We will soon put up information on the procedure.

How to get started in Ohio:

1. Certify your PV system: your installer will provide you with the information to get your system certified by the state.

2. Start selling your SRECs:

Option A: Sign up for our EasyBid service, and we’ll handle your SRECs. We’ll take care of registering your system to generate SRECs, and cross-listing your SRECs on our multi-state auction platform every month to make sure you get the best price for your SRECs.

Option B: Users who choose to manage their own SREC accounts can register with GATS or MISO in Ohio. Then post your SRECs every month on SRECTrade.com or find a third-party to sell your SRECs.